Lower rear Control Arms '78-'87 GM G-Body
Lower rear control arms for '78-'87 GM G-bodies with special Polyurethane bushings. We have taken the best characteristics from the many different designs available and wrapped them all up into one, and included several improvements. They are equipped with a grease fitting on each end, in a location for easy access. The grease enters an area between the two poly bushing inserts, and is directed to the inner spacer. Once there, the grease coats the inner spacer 360 degrees around, through several grooves in the poly bushings. This will eliminate any possible binding or squeaking, and allow quicker movement for improved performance. These custom new control arms will allow enough flex for comfortable street driving, but also be stiff enough to perform under the most severe racing conditions. Part #0200 is a direct bolt-in replacement for the stock lower rear control arms on the following vehicles:
- '82-'87 Buick Regal (GN, GN-X, T-Type, WE-4)
- '82-'87 Chevy El Camino
- '82-'83 Chevy Malibu
- '82-'88 Chevy Monte Carlo
- '82-'87 GMC Caballero
- '82-'88 Olds Cutlass RWD
- '82-'86 Pontiac Bonneville
- '82-'87 Pontiac Grand Prix
They will provide more stability for better handling, quicker acceleration and lower 60 ft. times, and are designed to work great on the street & track without any compromises in either area. The following are details and features included with each pair:
- CNC Machined rectangular steel tubing with round tube ends
- Special welding equipment & process for superior strength
- Provisions for mounting a swaybar based on stock location
- Black powdercoat finish, best heavy-duty coating available
- Custom Polyurethane bushings from Energy Suspensions*
- Special grease grooves in bushings and grease fittings included
- Custom machined inner steel spacer for improved performance
- All necessary hardware to install arms and mount swaybar
- Hardware is grade 10.9 and plated for rust prevention
- Easy to upgrade/install, with detailed instructions included
- One Year limited warranty, applies under racing conditions
- Comes complete and partially assembled, ready to install
We believe that they are equal or better and should outperform other control arms available at much higher prices. They are an excellent upgrade from the stock components, and are designed for street and track at any HP level. As noted above, there are many improvements even over the stock arms that have been boxed with upgraded Poly bushings. Our design will transfer power to the ground quicker than other arms with Poly bushings, and ride much smoother on the street than "rod-end" type or solid bushing styles. These new control arms have been proven by Terry Houston at 8.60's and over 160 mph.
For high HP applications with limited street driving, please check part # 3160201
|
(586) 294-4404
