2007-09 F/M/Crossfire 1000 Boondocker Control Box with Nitrous Capability
( Click for more details )

Item Code: 0551500-0106

F7 Boondocker Control Box with Nitrous Capability. Works with all efi arctic cats, 600cc through 900cc from 2000 model year.
( Click for more details )

Item Code: 0551500-0107

2009 F8 W/ Single Pipe Clutch Kit
( Click for more details )

Item Code: 130-200-8901

Clutch Alignment Tool for Z1 Turbo, M7, and Crossfire Models
( Click for more details )

Item Code: 1300031

Clutch Alignment Tool for Z1 Turbo,M7 and Crossfire Models
( Click for more details )

Item Code: 1300031C

98-2004 CHAINCASE STYLE CLUTCH ALIGNMENT TOOL
( Click for more details )

Item Code: 130003M

TurboSmart "E-Boost" Controller with up to 40 PSI; needed when installing larger turbo kits to go above 24 psi of boost.This is a nice small controller and easy to install and use. Also has RPM and Boost Recall functions.
( Click for more details )

Item Code: 1300302-1002

Z1 Turbo Clutch Alignment Tool.
( Click for more details )

Item Code: 1300644-496

This is an Anti-Ratchet 10 Tooth for the Diamond Drive...Replace the stock drive sprockets with these Anti-Ratchet drivers. A must when making big HP and really hooking it up. For the EXT models this is one of the first performance mods that should ...
( Click for more details )

Item Code: 13010TAR

Stage 1 Exhaust Can

Stage I - (4 hp at stock boost up to 9hp with high boost 9 lb weight savings)
Stage II - (5 hp gain at stock boost - up to 10 hp gain at high boost 14 lb weight savings)
Stage III - (09 Turbo ...
( Click for more details )

Item Code: 130111-1191

Z1 Turbo Stage 2 Exhaust can

Stage I - (4 hp at stock boost up to 9hp with high boost 9 lb weight savings)
Stage II - (5 hp gain at stock boost - up to 10 hp gain at high boost 14 lb weight savings)
Stage III - (09 ...
( Click for more details )

Item Code: 130111-1192

Stage 3 Straight Pipe Exhaust for Z1 Turbo

Stage I - (4 hp at stock boost up to 9hp with high boost 9 lb weight savings)
Stage II - (5 hp gain at stock boost - up to 10 hp gain at high boost 14 lb weight savings)
Stage
( Click for more details )

Item Code: 130111-1193

The HiJacker! pump up the BOOST

Adjust your snowmobile HP from 180 to 260+. 16 different increments to dial in the horsepower you want at a push of the button. Make your sled scream!
( Click for more details )

Item Code: 1301500-0112

This is a new intercooler for the Z1 Turbo along with the new charge tubes. This intercooler has more area than the stock intercooler for lower intake air temps and more HP. Charge tubes are polished.
( Click for more details )

Item Code: 1301500-9206

These charge pipes are a serious upgrade over the stock charge tubes are are for use with the stock intercooler on the Z1 Turbo.
( Click for more details )

Item Code: 1301500-9207

Get the most out of your stock turbo by adding this larger diameter High Flow CAST turbo outlet housing. The stock outlet is 1 3/4 ID VS the new HighFlow outlet 2 5/16 ID.This outlet will not work with stock exhaust or the original versions of the ...
( Click for more details )

Item Code: 1301800-0006

Z1 Turbo Clutch Holder
( Click for more details )

Item Code: 130200-004

TORSIONAL CONVERSION KIT - for Diamond Drive models enables use with adjustable torsional style spring. Note: Need threaded helix and old style secondary spring. If using our purple secondary you can use the same angle helix.
( Click for more details )

Item Code: 130200-0048

Turn your Diamond Drive into an old style torsional spring set up to improve acceleration, backshift, and ease of tuning. Check out our installation instructions on our tech page!
( Click for more details )

Item Code: 130200-0049

( Click for more details )

Item Code: 130200-016

( Click for more details )

Item Code: 130200-021

( Click for more details )

Item Code: 130200-022

( Click for more details )

Item Code: 130200-026

Z1 Turbo hole shot magna force weights. These hole shot arms will allow you to come out of the hole with the HiJacker button pushed without slipping the belt and hitting the rev limiter.
( Click for more details )

Item Code: 130200-0951

Z1 Turbo DDT1 90.5-98g D&D / Dalton Adjustable Weights. The DDT1 are the same arm that comes in the HiJacker clutch kit. The new DDT2 arms are the same profile as the T1's but with added weight for the big turbo's. Both of these arms have a special ...
( Click for more details )

Item Code: 130200-0955-T1

Z1 Turbo DDT1 90.5-98g D&D / Dalton Adjustable Weights. The DDT1 are the same arm that comes in the HiJacker clutch kit. The new DDT2 arms are the same profile as the T1's but with added weight for the big turbo's. Both of these arms have a special ...
( Click for more details )

Item Code: 130200-0955-T2

This clutch is a direct fit for 2007 M & Crossfire 800 and 1000 sleds.It is a must when adding big HP kits to keep the belt from slipping. Clutch does not come with helix,spring or rollers.
( Click for more details )

Item Code: 130200-1202

Z1 TURBO HIJACKER CLUTCH KIT - Comes with billet spider shim, adjustable clutch arms, helix, shift assist and a D&D performance belt - great for adjusting performance levels from 180hp to 260hp without removing clutch arms.
( Click for more details )

Item Code: 130200-1999

Stock Pipe Clutch Kit

Includes:
Wieghts
Springs
Helix

( Click for more details )

Item Code: 130200-6270

Stock Pipe Clutch Kit

Includes:
Wieghts
Springs
Helix

( Click for more details )

Item Code: 130200-7200

Stock Pipe Clutch Kit

Includes:
Wieghts
Springs
Helix

( Click for more details )

Item Code: 130200-7201

Single Pipe Clutch Kit

Includes:
Wieghts
Springs
Helix

( Click for more details )

Item Code: 130200-7202

Twin Pipe Clutch Kit

Includes:
Wieghts
Springs
Helix

( Click for more details )

Item Code: 130200-7203

03 F7 Stock Pipe Grass Drag Clutch Kit -Designed for Reprogrammed ECU Box
Part#: 200-7204
( Click for more details )

Item Code: 130200-7204

04 F7 EFI Stock Pipe Grass Drag Clutch Kit for Reprogrammed Box
( Click for more details )

Item Code: 130200-7205

04 F7 05/06 700 Sabercat Stock Pipe Clutch Kit
( Click for more details )

Item Code: 130200-7210

04 F7 SINGLE PIPE, 05-06 SABERCAT 7OO SINGLE PIPE CLUTCH KIT - WE RECOMMEND USING A 0627-020 BELT WITH THIS CLUTCH KIT
( Click for more details )

Item Code: 130200-7211

03-04 F7 Twin Pipes Clutch Kit
( Click for more details )

Item Code: 130200-7212

05 F7 Carb Stock Pipe Clutch Kit
( Click for more details )

Item Code: 130200-7219

05 F7 EFI Stock Pipe Clutch Kit
( Click for more details )

Item Code: 130200-7220

05 F7 Single Pipe Clutch Kit
( Click for more details )

Item Code: 130200-7221

05 F7 Twin Pipe Clutch Kit
( Click for more details )

Item Code: 130200-7222

05 F7 EFI Stock Pipe Clutch Kit for Machined Clutch and Polaris Belt
( Click for more details )

Item Code: 130200-7223

07 F8 Stock Pipe Clutch Kit Part#: 200-8700
( Click for more details )

Item Code: 130200-8700

07 F8 Single Pipe Clutch Kit Part#: 200-8701
( Click for more details )

Item Code: 130200-8701

07 Crossfire 800 Single Pipe Clutch Kit (0-3000ft Elevation)
( Click for more details )

Item Code: 130200-8709-1

07-08 F8 WITH SINGLE PIPE AND PORTING
( Click for more details )

Item Code: 130200-8711

07-08 CF/F8 Single Pipe/Shim Kit
( Click for more details )

Item Code: 130200-8712

07-08 CF/F8 Single Pipe/ Shim Kit
( Click for more details )

Item Code: 130200-8713

2008 F8/XF8 with Single Pipe and Y-Pipe Clutch Kit
( Click for more details )

Item Code: 130200-8801