Stainless steel weld bung to add an O2 sensor for wide range of use. Comes with a plug so you can remove it from the car. Get one for every car so you can move your meter around.
( Click for more details )

Item Code: 001O2BUNG

Bosch LSU4.2 5-wire, wide-band O2 sensor
( Click for more details )

Item Code: 3273737

6-ft. long, mini to stripped-and-tinned, matching LM-1 analog output spcifications
( Click for more details )

Item Code: 32716140

Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines. A must if you don't have or don't want to install a bung for testing.
( Click for more details )

Item Code: 3273728

-Inductive Clamp Accessory for LM-2, DL-32, LMA-3, and RPM Converter.

-Simply clamp on to one spark plug wire to log RPM.

-Cable is 6 feet in length.

Kit includes: Inductive Clamp and LM-2 ...
( Click for more details )

Item Code: 3273834

To minimize the effects of noise coupling with the extended-length sensor cable, Innovate recommends minimizing the length of the power-supply cable. <2’ is ideal. Noise coupling may be present if the bar graph is flickering. Excessive coupling will
( Click for more details )

Item Code: 3273739

The Bosch LSU4.2 wide-band O2 sensor (shipped as part of the LM-1 kit) is rated to operate at an exhaust gas temperature of < 1300 degrees (F), and a sensor housing temperature of < 900 degrees (measured at the bung) for maximum accuracy and ...
( Click for more details )

Item Code: 3273729

Wall adapter for LM-1 meter only.
( Click for more details )

Item Code: 3273732

Adapter for computers without Serial ports. This cable will convert Serial to USB. Software included.
( Click for more details )

Item Code: 3273733

( Click for more details )

Item Code: 3273738

The Serial Program Cable will allow you to connect any of the following devices to your PC. (LC-1, XD-1, LMA-3)
( Click for more details )

Item Code: 3273746

Terminator Plug for use with XD-1, LMA-3, LC-1, and ST-12.
( Click for more details )

Item Code: 3273750

This custom cable will allow you to connect and/or daisy chain the following products: XD-1, LC-1, LMA-3, ST-12. Also used to connect the LM-1 to the XD-1.
( Click for more details )

Item Code: 3273760